镧与镍共沉积的研究

由于含稀土的合金新材料具有多种特殊功能，因此，其制备技术已为人们所关注．制备含稀土合金的方法有高温烧结法、真空蒸发法、离子溅射法及电化学法等．其中电化学法设备简单，容易获得不同组份的表层材料，但是，由于稀土元素的电位很负，从电解质水溶液中沉积稀土及其合金是相当困难的，以往曾有采用熔融盐电解质或非水电解质制备稀土合金的一些报导[1，2]，而从电解质水溶液中电沉积稀土合金的报导甚少．本研究采用适宜的络合剂，实现了从电解质水溶液中电沉积Ni－La合金，镀层中钠含量最高达22．58％（质量分数，下同）．通过XPS及…     

阴离子交换固相萃取-气相色谱/质谱法分析人血浆中6种神经性毒剂降解产物

采用醋酸汞去除蛋白,实现了阴离子交换固相萃取-气相色谱/质谱法同时测定人血浆中6种神经性毒剂降解产物的三甲基硅烷衍生物。考察了不同溶剂的去蛋白效率和不同固相萃取柱对毒剂降解产物的保留行为,优化了阴离子交换树脂的洗脱条件。采用选择离子监测方式,6种降解产物在0.05~5.0 mg/L范围内呈良好的线性关系,最低检出限在22μg/L以内;RSD均小于9.7%。该方法检测灵敏度高,血浆样品干扰小,是一种理想的血浆中神经性毒剂降解产物的检测方法。     

多孔纳晶TiO2薄膜光催化剂的研制及其催化性能

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

Syntheses of Two Potential Ligands for Tc-99m Labeling as Diagnosis Agents of Alzheimer''''s Disease

Two types of ligands-biphenyl and stilbene derivatives, whichcan be labeled with Tc-99m for the diagnosis of Alzheimer'sdisease (AD) have been synthesized successfully. The key stepsin these two syntheses involved Suzuki reaction and Wittig reac-tion respectively. The new discovered debromination reactionmay be expanded to the compounds with double or triple bondadjacent to the carbon atom bearing the bromine atoms. Thesetypes of syntheses provide a route to a series of biphenyl andstilbene derivatives that will benefit the search of new imagingagents for AD.     

PHEMA hydrogels obtained by a novel low-heat curing procedure with a potential for in situ preparation

In this work, we report on poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels obtained by a low heat curing reaction. These materials are suitable for in situ preparation and therefore endowed with a potential for several biomedical applications. The novel procedure adopted involves as the first step the synthesis of a soluble oligomeric PHEMA precursor containing polymerizable functions as side substituents. As the second step, the precursor is dissolved in equal amounts of 2-hydroxyethyl methacrylate (HEMA) and water, to form a viscous but still injectable syrup. A low temperature water soluble initiator is then added. The curing reaction starts promptly and is completed within few minutes. During the entire process the internal temperature never rises above 40 degrees C. Preliminary mechanical characterizations performed on the hydrogels in their water-swollen state and diffusion tests in absorption/desorption experiments clearly indicated that on all respects the novel hydrogels are comparable with conventional PHEMA hydrogels obtained according to literature from HEMA in the presence of divinyl crosslinkers. However, the much shorter curing time combined with the far lower curing temperature endow the new hydrogels with a higher potential in view of specific surgical requirements, and particularly for in situ preparation.     

高效石墨浮选剂的合成

高效石墨浮选剂的合成金婵，薛玉，汪进，刘欣荣，秦英海（哈尔滨工业大学应用化学系哈尔滨１５０００１）（大庆石化总公司大庆）关键词石墨，浮选剂，合成，混合烃由于石墨具有良好的力学性能、导电、高熔点等性质，广泛用于原子能、宇航和民用工业。隐晶质石墨属于微晶...     

手性液晶掺杂剂（S）—4‘—辛氧基—4—（2—酰氧基—丙氧基）联苯的合成

手性液晶掺杂剂（Ｓ）┐４┐辛氧基┐４┐（２┐酰氧基┐丙氧基）联苯的合成马汝建李培荣国斌＊（华东理工大学化学系上海２００２３７）关键词铁电液晶材料，手性液晶掺杂剂，合成，手征性１９９７－０２－０３收稿，１９９７－０８－０７修回铁电液晶显示器所用的材料...     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.